Lcd Module Reassembly Process; Replacing The Wlan Antenna - Acer TravelMate P215-52 Service Manual

LCD Module Reassembly Process

Replacing the WLAN Antenna

1. Place the MAIN antenna (black-color) to the right side of the LCD cover. Make sure
the antenna PCB circuit area is properly seated and placed onto its compartment
highlighted by a green rectangle as shown in
2. Adhere the grounding foil of the MAIN antenna as marked in yellow
Figure 1-65. Replacing the WLAN Antenna
1-51
Figure 1-65.
MAIN
Machine Maintenance Procedures
0
0
(Figure 1-65).