3. Attach the copper mylar (D) onto the keyboard and speaker cable as shown in
Figure
1-85.
NOTE:
NOTE:
If the mylars (D and F) are deformed during the removal procedure, replace them
with the new ones.
Figure 1-85. Replacing the Speaker Module
4. Attach the mylar (F) onto the keyboard as shown in
Figure 1-86. Replacing the Speaker Module
+
IMPORTANT:
When attaching the mylars, make sure there are properly aligned with
the guide pins (E and G), and placed onto their designated locations as
shown in
Machine Maintenance Procedures
E
D
E
G
B
Figure 1-85
and
Figure
E
Figure
1-86.
F
G
1-86.
1-66