Connecting Broadcast Tv Or Cable Tv; Connecting A Computer - Insignia I-LC23Q1 User Manual

4-4

Connecting Broadcast TV or Cable TV

4-4-1 TO CONNECT USING COAXIAL AUDIO AND VIDEO
1. Connect the coaxial (RF) connector from your antenna or cable box to the
HF/VHF connector on the back of your LCD TV with the correct optional cable.
2. Turn on your LCD TV (see 1-4 Turning ON the Power), then press the INPUT
button repeatedly to select CATV.
3. If you have connected a VCR to the UHF/VHF connector on the back of your
LCD TV, connect your broadcast TV or cable TV coaxial (RF) cable to the
UHF/VHF connector on the back of your VCR.
WARNING!
UHF/VHF
(CATV)
S-Video
(S1/S2)
Composite
Video/Audio in
(AV1/AV2)
Component HDTV
Video/Audio in
(YPBPR)
Subwoofer
4-5

Connecting a Computer

4-5-1 TO CONNECT USING DVI VIDEO
1. Connect the DVI connector on your computer to the DVI connector on the back
of your LCD TV with the correct optional cable.
2. Connect the Audio Out jack on your computer to the Line in jack on the back of
your LCD TV. See 2-2 Right-side Connectors for the location of the Line in
jack.
3. Turn on your LCD TV (see 1-4 Turning ON the Power), then press the INPUT
button repeatedly to select DVI-D.
NOTE:
If an outdoor antenna or cable system is connected to your LCD
TV, make sure that the antenna or cable system is correctly
grounded.
The DVI input of this display is compatible with HDCP Copy protection.
Chapter 4 Connecting Devices
21
21