Chapter8 Advanced Settings
TO SET THE PARENTAL CONTROLS FOR MOVIES
1. Press the MENU button on the remote control to
open the OSD.
2. Press the Navigation (UP/DOWN) buttons to
select the Setup menu.
3. Press OK to open the menu.
4. Press the Navigation (UP/DOWN) buttons to
select the Parental Controls submenu.
5. Press OK to open the submenu.
6. Use the number pad to enter your password if prompted. If you have not set a
password, enter 0000. For more information about setting a password, see 8-3
Setting a Password.
7. Press the Navigation (UP/DOWN) buttons to select the MPAA option.
8. Press OK to open the option menu.
9. Press the Navigation (UP/DOWN) buttons to select each option, then press the
Navigation (RIGHT/LEFT) buttons to select BLOCK or UNBLOCK.
This option lets you block the following MPAA movie ratings:
G (general audience)
PG (parental guidance suggested)
PG-13 (recommended for children 13 years of age and older)
R (mature audience)
NC-17 (no one under 17 years of age)
X (no one under 17 years of age)
10. Press EXIT when you are finished making changes to this option.
8-3
Setting a Password
You control access to the parental controls with a password. The default password
is 0000. You can change the password to any four-digit number.
TO SET OR CHANGE A PASSWORD
1. Press the MENU button on the remote control to
open the OSD.
2. Press the Navigation (UP/DOWN) buttons to
select the Setup menu.
3. Press OK to open the menu.
4. Press the Navigation (UP/DOWN) buttons to
select Parental Controls.
34