Making connections
Connecting the power cord
To connect the power cord:
1 Slide the AC power adapter holder into the
holder mounting hole on the back of the TV.
2 Place the AC power adapter into the holder.
3 Insert the power cord into the AC adapter, then
insert the AC power adapter into the DC IN 12V
jack on the back of your TV.
4 Plug the power cord into a power outlet.
Warning
•
If you wall mount your TV, make sure that you
use the AC power adapter holder.
•
If you place your TV on a flat surface, such as a
table, you do not have to use the AC power
adapter holder.
•
When your TV is turned off, power is still flowing
into it. To completely disconnect power, unplug
the power cord.
10
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV
Adapter holder
For
NS-19E430A10
For
NS-22E430A10
Holder mounting hole
AC adapter
Power cord
www.insigniaproducts.com
Connecting an antenna, cable TV, or
satellite TV
To connect an antenna, cable TV, or satellite TV:
1 Make sure that your TV is turned off and the
power cord is disconnected.
2 Connect one end of a coaxial cable to the
ANT/CABLE IN jack on the back of your TV, then
connect the other end to the antenna, cable TV,
or satellite TV jack.
Antenna, cable TV, or satellite TV
connection
3 Turn on your TV.
4 Press INPUT on the remote control or the side of
your TV to display the input source menu, then
press INPUT repeatedly or press
TV. Press OK/ENTER.
Note
You can also press TV on the remote control to select
the TV.
Back of TV
or
to select