Displaying The Serial Number; Resetting To Factory Settings - Insignia I-LC23Q1 User Manual

Chapter8 Advanced Settings
8-5

Displaying the Serial Number

1. Press the MENU button on the remote control to
open the OSD.
2. Press the Navigation (UP/DOWN) buttons to
select the Options menu.
3. Press OK to open the menu.
4. The serial number is displayed on screen.
5. Press EXIT to close the OSD.
8-6

Resetting to Factory Settings

To reset to the default factory settings, follow these steps.
1. Press the MENU button on the remote control to
open the OSD.
2. Press the Navigation (UP/DOWN) buttons to
select the Options menu.
3. Press OK to open the menu.
4. Press the Navigation (UP/DOWN) buttons to
select Factory Preset.
5. Press OK.
6. Press EXIT to close the OSD.
36