Testing the SAMs
7.10
This feature tests communication between the SAM slots and the SAM micro-controller (SMC).
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Diagnostic Menu
Display
Keypad
Beeper
RS232
Tailgate
USB
Mag Stripe Reader
Smart Card Reader
SAM
SAM
Found SAM Slot1.
Found SAM Slot2.
Found SAM Slot3.
Found SAM Slot4.
SAM
Check Slot2 ATR
Read data from Slot2
(Result)
SAM
Power off all slots
Close all smc slots
74
Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Using the stylus, tap Diagnostic Menu.
Tap SAM.
ATR means answer to reset.
SMC stands for SAM micro-controller.
Chapter 7 Diagnostic Menu
Section 7.10 Testing the SAMs