Defining The Server Ip Address - Ingenico i6780 User Manual

Local IP Port
Old Value: XXXXX
Enter New Value:

Defining the Server IP Address

6.4.14
If your terminal is using Ethernet, and DHCP is set to None, you will need to configure the
download server's IP address.
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Enter Password:
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Sys Parameters
Download Method
Download Port
Setup Port
Setup Port
Port1
Port2
Port3
Port3
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
DHCP
Local IP
Local IP Port
Server IP
Ingenico 6780 User's Guide
Enter the local IP port number.
Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Using the stylus, tap Supervisor Menu.
Key password [2] [6] [3] [4], then press [Enter].
Tap Sys Parameters.
Tap Setup Port.
Tap Port3, Ethernet.
Tap ▼ until you reach Server IP, then tap Server
IP.
53