Setting Up The Port; Selecting The Download Interface Type - Ingenico i6780 User Manual

Setting Up the Port

6.4

Selecting the Download Interface Type

6.4.1
Use this procedure to select RS232, RS485, Ethernet, etc. as the interface type for Port1
(Host), Port2 (Aux), or Port3 (Ethernet).
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Enter Password:
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Sys Parameters
Download Method
Download Port
Setup Port
Download Port
Port1
Port2
Port3
Dial
Host Port
Aux Port
PortX
Interface Type
Baud Rate
Data Bits
PortX
Auto Detect Result
RS232
RS485
40
Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Using the stylus, tap Supervisor Menu.
Key password [2] [6] [3] [4], then press [Enter].
Tap Sys Parameters.
Tap Setup Port.
Tap Port1, Port2, or Port3.
(By default, Port 1 = Host, Port 2 = Aux, Port 3 =
E-NET port - Ethernet.)
Press [Enter] to select Interface Type.
Select the communications method you want. If
you select Port 1 and Auto Detect Result, the
application will detect the communications type of
a cable plugged into the selected port and return
that information to you.
Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port