Schumacher SL 137-GU Manual page 17

4. FEATURES
1
4
5
5. CHARGING
IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS.
Failure to do this will reduce the battery's capacity and may void the warranty.
5.1 Using the AC wall charger: Connect the micro USB end of the charging cable to the
micro USB port on the back of the work light. Insert the USB end of the cable into
the USB port on the wall charger. Plug the AC charger into a live AC outlet.
5.2 Using the 12V DC accessory plug: Connect the micro USB end of the charging
cable to the micro USB port on the back of the work light. Insert the USB end of the
cable into the USB port on the 12V accessory plug. Plug the 12V accessory plug
into a 12V DC power outlet.
5.3 Plug into your power supply. The charging LED will light RED, to indicate charging
has begun.
5.4 When the battery is fully charged, the charging LED will change to GREEN.
5.5 Recharge the work light after use, and at least every 6 months.
L I T H I U M - I O N
3
2
6 7
9
T E C H N O L O G Y
1. Horizontal magnets
2. Charging status LED indicators
3. Charging socket
4. Rotating (360°) hooks
8
5. 3W LED
6. 16 LED SMD
7.
8. Vertical magnet
9. USB/Micro USB charging cable
• 16 •
ON/OFF
EN