Fisher & Paykel WASHSMART ECO Installation Manual/User Manual page 49

Solving operating problems
PROBLEM
Spin speed sounds
slower than normal.
Washer is continually
going out of balance.
Too much or too little
water when filling on
auto water level.
Washer is making
noises.
Small puddle coming
from under the
washer.
TROUBLESHOOTING
POSSIBLE CAUSES
Clothes are unevenly distributed
in the bowl.
The outer wash bowl may still
be hot from being filled with hot
water.
Washer may not be level.
Too much water for the load
The washer needs to determine
the correct water level for the
load.
Some loads do not suit
water level, eg pillows.
Banging.
Other noises.
The water level is too high for
the amount of clothes and has
caused excessive splashing.
Large bulky garments (eg pillows,
duvet) can cause splashing.
WHAT TO DO
Washer has compensated by lowering the
spin speed.
The washer has slowed the spin speed as a
protective measure.
Check the washer is level and does not
rock in any direction, refer to 'Levelling
instructions'.
Ensure an appropriate water level is
selected for the load size (or select
water level).
Refer to 'Out of balance recovery routine'
for more information to change the out of
balance recovery mode.
Refer to the 'Wash options' section.
Manually select the most appropriate water
AUTO
level for the load.
Load is out of balance. Touch
redistribute the load.
Refer to the 'Caring for your washer'
section.
Select a lower water level, refer to 'Water
Level'.
Wash on the
'Washing bulky items'.
and
cycle, refer to
DELICATE
AUTO
49