Fisher & Paykel WASHSMART ECO Installation Manual/User Manual page 38

If you always use
wash be used regularly, eg every 5th wash should be at least a warm one to maintain the
cleanliness of your washer.
Out of balance recovery routine
When your washer is spinning it can sense if the wash load is out of balance. If an out of
balance load is detected, the washer will stop and re-try spinning one more time. If it still
senses an unbalanced load there are two options the washer can take.
Automatic recovery OFF (default setting)
Your washer will stop, beep, and show
screen. You must redistribute the load more evenly yourself and touch
cycle. Use this option if you wish to conserve water.
Automatic recovery ON
Your washer will try to automatically correct the out of balance load. It will fill with water
and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery routine:
1
WashSmart™ Eco washer and WashSmart™ washer
2
38
CHANGING PRE-SET OPTIONS
or
COLD CONTROLLED COLD
water, we recommend that a
in three phases on the display
Enter Option Adjustment mode.
Select the cycle.
HEAVY
Touch the button to turn automatic
recovery or
or
WARM HOT
to resume the
.