Fisher & Paykel WASHSMART ECO Installation Manual/User Manual page 37

Controlled Cold (not available on QuickSmart™ washer)
If your incoming cold water temperature is very low you will get a less effective wash. The
CONTROLLED COLD
raise the temperature of the wash to approximately 20°C.
To programme the Controlled Cold temperature option:
1
2
3
4
CHANGING PRE-SET OPTIONS
option solves this problem by adding a small amount of hot water to
Enter the Option Adjustment mode, refer
to the 'Option Adjustment mode' for
instructions.
Select the
REGULAR
Select wash temperature by touching
COLD
the button (if not already
WASH TEMP
selected).
The digital display shows the temperature
adjustment possible. The default setting is
, which is the same temperature as the
incoming water from the cylinder for cold
water.
Touch the
MORE
displayed. Your washer will now control the
cold temperature to approximately 20°C.
Each of the remaining settings equals an
approximate 1°C temperature increase or
decrease from this point(excluding
cycle.
button until is
).
37