Panasonic KX-FMC230 Operating Instructions Manual page 79

Connecting to a
To run the Multi-Function Center software, you need the following software and hardware.
¡IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
¡Microsoft Windows 3.1, 3.11 or Windows 95
¡Hard Disk drive with at least fourteen (14) MB of available storage
¡RS232C Serial Port
Note:
¡The unit cannot print on envelopes.
» If your PC has a 9 pin com port:
» If your PC has a 25 pin com port:
computer!
25 Pin Male
RS232C cable
(Included)
25 Pin Male
RS232C cable
(Included)
To COM port
9 Pin Female
To COM port
9 Pin Female
Setup
25 Pin Adaptor
(Included)
79