Panasonic KX-FMC230 Operating Instructions Manual page 111

15 Insert the blue gear into the blue core of the
new film.
16 Insert the three green gears into the remaining
cores of the new film.
17 Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
18 Lock the four gears of the film by (A) pushing
back the top side gears and (B) pulling the
bottom side gears forward until they lock into
place.
¡If the film is slack, tighten it by winding the
bottom side gears.
Incorrect
19 Insert the film cartridge by matching the blue
label on the cartridge with that on the unit.
10 Close the front cover securely by pushing down
on both ends.
¡The unit will check if the film is installed
correctly. The following message will be
displayed.
Display:
¡If the following message is displayed, the film
is not inserted correctly in the cartridge.
¡Reinsert it correctly.
Correct
tight
PLEASE WAIT
CHECK FILM
For Assistance, Call 1-800-435-7329
Blue core
Slots
Guide tabs
Guide tabs
Slots
Blue label
Blue gear
Cartridge
Top side
Bottom
gears
side gear
Bottom
side gears
Film cartridge
Blue labels
Ink Film
Blue gear
Green gears
Film
Top side gear
B A
111