Ink Film - Panasonic KX-FMC230 Operating Instructions Manual

Ink Film

Checking how much film you have
To check the amount of remaining film, press (FILM\REMAINING) while the unit is idle. The display indicates
the approximate amount of remaining film.
FILM E F
FILM E F
Replacing the film or film
When the unit detects the end of the film, one of the following messages will be displayed.
FILM NEAR EMPTY
FILM EMPTY
To order replacement parts, see page 7.
1 Slide the front cover open lever forward to unlock
the front cover and lift to open.
2 Remove the film cartridge.
¡If you have purchased a film cartridge (Model no.
KX-FA135) for replacement, skip to step 9.
¡To replace only the film, go to step 3.
3 Unlock the four gears by (A) pulling the top side
gears (blue and green gears) forward and (B)
pushing back the bottom side gears (green gears).
Remove the used film.
4 Remove the four gears from the used film cores.
Caution:
¡The film is not reusable. You can order a new
film for replacement through your nearest
Panasonic dealer or call 1-800-332-5368.
110
When the film indicator points to this position, the remaining film will print up to
25 pages of letter size documents. Prepare a new film or film cartridge for
replacement.
The remaining film prints approx. 15 letter size documents. Prepare a new film or
film cartridge.
The film is empty. Install a new film or film cartridge.
For Assistance, Call 1-800-435-7329
left!
cartridge!
Blue gear
A
B
Green gear
Bottom side gears
Gears
Film cartridge
Front cover
open lever
Top side gears
Green
gear
A
B
Green gear
Gears
Film cores