Connecting A Computer - InFocus LP340B Manual

Connecting a Computer

The projector ships with an analog computer cable. If your com-
puter has a digital output, you can order the optional digital com-
puter cable for use with the LP350 only.
1 Plug the end of the computer cable with one cable into the
connector on the projector.
2 Plug the blue end of the computer cable into the video connec-
tor on your computer.
USB mouse
in in
audio cable
computer cable
Connecting the projector to a computer
NOTE: Many laptop computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 44 and in the
Service section of our website.
F 6
IGURE
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
projector. See "Optional Accesso-
ries" on page 43.
9