Connecting A Computer - InFocus LP2980 User Manual

Connecting a Computer

1 Plug one end of the computer cable into the blue "Computer
VGA" connector on the projector.
2 Plug the other end of the computer cable into the monitor con-
nector on your computer. If you are using a desktop computer,
you need to disconnect your monitor cable from your com-
puter.
computer cable
Do you want to play your computer's audio on the projector?
1 Plug either end of the audio cable (ordered separately) into
the audio connector on your computer.
2 Plug the other end of the audio cable into the "Audio in" con-
nector on the projector.
Do you want to display the image on your desktop computer's moni-
tor as well as on the projection screen?
1 Plug the monitor's cable into the "Monitor VGA" connector
on the projector.
All manuals and user guides at all-guides.com
S-Video
Video Computer VGA Monitor VGA Audio in PS2/RS-232 USB
Connecting the projector to a computer
NOTE: Many laptop computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 42 and in the
Service section of our website.
F 6
IGURE
9