Image Menu - InFocus LP340B Manual

U s i n g t
NOTE: Some screen savers
interfere with the operation of
Auto Image. If you' r e experiencing
problems, try turning your screen
saver off, then turning Auto Image
off and back on.
NOTE: When you connect an
HDTV source, the projector
automatically displays the image
from an LP350 in 16x9 format.
With the LP340B, you must turn
Resize off to display 16x9 format.
24
h e P r o

Image Menu

Display
F 16
IGURE
Image menu
Keystone
This option helps to keep the image square as the angle of projec-
tion is changed. To adjust the keystone, highlight Keystone, then
click the left or right mouse button. This option is available for
computer sources displaying their native resolutions only, SVGA
800x600 for the LP340B and XGA 1024x768 for the LP350.
Overscan
This option crops all the edges of the image to remove noise gen-
erated on the edges by your source. This option is available for
video sources only.
Auto Image
The projector automatically adjusts tracking, signal synchroniza-
tion and vertical and horizontal position for most analog comput-
ers (Auto Image does not apply to video sources or digital
computer sources). If you want to adjust these features manually,
you must turn off
the Image menu and clicking the left or right mouse button to
select "off".
Resize
This option works differently for computer and video sources.
For computer sources,
scaling it up or down. It only affects computer images that are not
the projector's native resolution. When
makes the best fit of the image to the computer screen. If you turn
off (by highlighting it in the Image menu and clicking the
Resize
left or right mouse button to select "off"), the image may be either
cropped or too small for the screen.
j e c t o r
Audio Image Controls
> >
Keystone
Overscan
Auto image
Resize
Manual sync
Manual tracking
Horizontal position
Vertical position
Auto Image
automatically resizes the image by
Resize
Language Status
on
on
on
first by highlighting Auto Image in
is on, the projector
Resize