InFocus LP340B Manual page 18

S e t t i n g
NOTE: The audio adapter is
provided so that the same audio
cable used to connect a computer
can be used with the adapter to
connect a VCR.
CAUTION: Your video player
may also have a "Video Out"
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
12
u p t h e
audio
adapter
F 8
IGURE
Connecting the projector to a video player using an S-video cable and the audio cable
and adapter
4 Plug the audio adapter's white connector into the left "audio
out" connector on your video player. Plug the adapter's red
connector into the right "audio out" connector on the video
player (Figure 7 and Figure 8).
5 Plug the audio adapter's other end into the audio cable.
6 Plug the audio cable into the "audio in"
projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and
SECAM. It automatically adjusts to optimize its performance for
the incoming video.
P r o j e c
in
S-video
cable
audio cable
t o r
in
connector on the