Citizen iDP-3550 User Manual page 98

ESC "y" n
[Function] Setting the print lines after paper near end detection
[Code] <1B>H<79>H n
[Range] 0 n1 255
[Outline] This command sets the number of print lines after paper near end detection. It stops printing
after printing n
state (See 4.11 Operation Panel and Display of Error). The PE signal (parallel interface only)
changes when the paper near end is detected.
[Default] n = 0
ESC DC2 n1 n2
[Function] Deleting the download character, message, bit image
[Code] <1B>H <12>H n1 n2
[Range] 0 n1 3
0 n2
[Outline] This command deletes the downloaded characters, message, and bit image.
With n2, specify which data of the function specified with n1 should be deleted.
n2 = 0
n2 0
2 lines since detection of the paper near end, resulting in the paper near end
(Specify 0 at n1 = 0)
(1 n2 10 at n1 = 1)
(32 n2 224 at n1 = 2)
(Specify 0 at n1 = 3)
n1 Object Deleted
0 All(Message, characters, bit image)
1 Download message
2 Download characters
3 Download bit image
Deletes all the download function specified with n1.
Deletes the data downloaded at the value specified with n2 (value specified
when saving with each download command), of the download function
specified with n1.