Citizen iDP-3550 User Manual page 59

Citizen systems user's manual printer idp-3550, idp-3551
Hide thumbs Also See for iDP-3550:
Table of Contents

Advertisement

ESC " " n1 n2
[Function]
Specifying the bit image mode
[Code]
<1B>H <2A>H n1 n2
[Range]
1 n1 + 256
1 n1 + 256
[Outline]
This command allows printing in the bit image mode. Divide the number of dots printed by
256 and assume its quotient to be n2 and remainder to be n1. Therefore, the number of
horizontal dots will be n1 + 256 n2.
If the bit image data is entered beyond the dot positions printable in one line, the surplus data
will be discarded. Normal data processing is restored after bit image printing. Printing is
done in a single direction.
ESC " " n
[Function]
Specifying/Canceling the underline
[Code]
<1B>H <2D>H n
[Outline]
This command selects/deselects an underline. The underline is selected at n = 1 and
deselected at n = 0.
[Default]
n = 0
ESC "1"
[Function]
Setting the 1/9-inch line feed width
[Code]
<1B>H <31>H
[Outline]
Only effective for Graphic type.
This command sets the line feed width to 1/9 inch.
ESC "2"
[Function]
Setting the 2/9-inch line feed width
[Code]
<1B>H <32>H
n2 360 (for DP654 mechanism)
n2 400 (for DP657 mechanism)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idp-3551

Table of Contents