DC1
[Function]
[Code]
[Outline]
DC2
[Function]
[Code]
[Outline]
DC2
[Function]
[Code]
[Outline]
Selecting the printer
<11>H
This command sets the printer in the selecting status.
Specifying/Canceling the inverted character
<12>H
This command selects/deselects the inverted characters.
beginning of one line. Otherwise, it is overridden. Erect and inverted characters cannot be
mixed in one line.
Specifying the red print
<12>H
This command specifies red-color characters. All the characters in one line are printed in red
by prefixing the print data with this command and sending it to the printer. When you want
to use red characters, use this command for each line.
(CBM2 Mode)
(CBM1 Mode)
Enter this command at the
(CBM2 Mode)