Citizen iDP-3550 User Manual page 114

ESC "p" m n1 n2
[Function] Specifying the pulse generation
[Code] <1B>H <70>H m n1 n2
[Range] 0 m
0 n1 n2 255
[Outline] This command outputs the signals specified with n1 and n2 to the connector pins.
The ON time is n1 2 mS and the OFF time is n2 2 mS.
[Caution] The user should consider driving the drawer at the following duty ratio.
The drawer kick-out solenoid should have a resistance value of 36
lower one because an overcurrent will flow. For the drawer power, be sure to use the printer
power (Drawer kick-out connector No. 4 pin).
1
m Connector Pin
0 Drawer kick connector No. 2 pin
1 Drawer kick connector No. 5 pin
ON time (ON time + OFF time) 0.2
(It is recommended to make n2 four times higher or more than n1.)
or more. Do not use a