Replacing the wok burner
Carefully replace the burner parts as per the following illustrations.
z
Fit the flame spreader to the housing as shown below. Make sure the burner is not
z
able to rotate.
Check that:
the ignitor is always clean to ensure trouble-free sparking.
z
the probe is always clean to ensure correct operation of the safety valves.
z
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and
z
methylated spirits.
Correct positioning of flame spreader
Probe
54
CARE AND CLEANING
Flame spreader
Ignitor
Correct positioning of cap and ring
Incorrect and correct positioning
of cap and ring
Ring
Cap