Table of Contents
Advertisement
LampSave
Setting Auto Power Off
This function allows the projector to turn off automatically if no input source is detected
after a set period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off
menu and press
increments. If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time period.
Maintenance
62
Adjusts the lamp power automatically and lowers the
brightness to extend the lamp life
/ . The time period can be set from 5 to 30 minutes in 5-minute
Advertisement
Table of Contents
