Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted.
•
In the connections shown below, some cables may not be included with
the projector (see
commercially available from electronics stores.
•
For detailed connection methods, see pages 21-25.
•
For the combination of an active audio in source, see the marks in the
illustration.
1. Audio Cable
2. VGA cable
3. VGA to DVI-A cable
4. USB Cable
20
Connection
"Shipping contents" on page
3
2
1
1
1
2
1
1
2
4
1
2
5. Component Video to VGA (DSub)
adapter cable
6. S-Video cable
7. Video cable
8. HDMI cable
8). They are
7
6
8
1
5