BenQ TW526E User Manual page 11

Controls and functions
Projector
1
2
3
4
5
6
7
8
9
1. Focus ring
Adjusts the focus of the projected image.
See "Fine-tuning the image size and clarity"
on page 28 for details.
2. Zoom ring
Adjusts the size of the image. See
tuning the image size and clarity" on page
28 for details.
3. TEMP(temperature) warning light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 67
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5. POWER indicator light
Lights up or flashes when the projector is
under operation. See
67 for detail.
6. POWER
I
I
Toggles the projector between standby
mode and on.See
projector" on page 26
the projector" on page 46
"Fine-
for details.
"Indicators" on page
"Starting up the
and "Shutting down
for details.
7. Volume /Arrow keys (
/ Right)
Adjusts the sound level.
When the On-Screen Display (OSD)
9
menu is activated, the #7 and #9 keys are
10 used as directional arrows to select the
11
desired menu items and to make
adjustments. See
7
page 30 for details.
12
8. ECO BLANK
13
Used to hide the screen picture. See
"Hiding the image" on page 42
9. Keystone/Arrow keys (
/ Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 29
details.
10. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed
a problem. See
for details.
11. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
28 for details.
12. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 33
details.
13. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page
36 for details.
Activates the selected On-Screen
Display (OSD) menu item. See
the menus" on page 30
/ Left,
"Using the menus" on
for details.
/ Up,
"Indicators" on page 67
"Using
for details.
Introduction 11
for
for