Set Mode; I Set Mode Programming - Icom IC-GM1600 Instruction Manual

5

SET MODE

I SET mode programming

SET mode is used to change the condition of 11 transceiver
functions: beep tone function, monitor switch action, back-
lighting function, LCD contrast selection, auto power save
function, self check function, battery voltage indicator, signal
strength indicator, squelch sensitivity function, VOX gain* and
VOX delay*.
*Available for on-board use only.
D SET MODE ITEMS The displays show the default settings, and the selected item is displayed in the dotted circle.
VOX gain*
Squelch sensitivity
Signal strength
indicator
11
VOX delay*
*Available for on-board use only
: Push
: Push
Battery voltage
D SET mode operation
q Turn power OFF.
w While pushing [SQL•
SET mode.
• "bp" (Beep tone function setting) appears.
e Push [SQL•
MONI
desired item, if necessary.
r Push [Y]/[Z] to select the desired condition of the item.
t Push [16] to exit the SET mode.
Beep tone
Starting item
Push and
and
Self check
], turn power ON to enter the
MONI
] or [SQL• ] and [Y]/[Z] to select the
MONI
Monitor switch Backlighting
LCD contrast
Auto power save