Set Mode; I Set Mode Programming - Icom IC-M72 Instruction Manual

I SET mode programming

SET mode is used to change the condition of 18 transceiver
functions: beep tone function, weather alert function, scan
type, scan resume timer, auto scan function, dual/tri-watch
function, monitor key action, backlighting function, LCD con-
trast selection, auto power save function, self check function,
battery voltage indication, squelch sensitivity, channel name
scroll type, scroll speed, scrambler code, VOX gain and VOX
delay.
D SET MODE ITEMS
Beep tone* Scan type
VOX delay
VOX gain
Voice scrambler
†
code
Scroll speed
‡ Scan resume timer
: Push [ ], or while pushing and holding [
: While pushing and holding [
*Starting item
†
Availability may differ according to versions.
‡
Not available with Dutch versions.
Channel name scroll type Squelch sensitivity

SET MODE

D SET mode operation
q Turn power OFF.
w While pushing and holding [
the SET mode.
• "BEEP" (Beep tone function setting) appears.
e Push [
], or push [
sired item.
r Push [Y Y ]/[Z Z ] to select the desired condition of the item.
t To exit the SET mode, push [16•9].
‡ Auto scan start function
], push [Y]
], push [Z]
Power save
Battery voltage indication
7
], turn power ON to enter
]] and [Y Y ]/[Z Z ] to select the de-
‡ Dual/Tri-watch ‡
Monitor key
action
Display
backlight
LCD
contrast
function
Self-check function
6
7
17