Frequency Transferring - Icom IC-756PRO Instruction Manual

Frequency transferring

The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
• Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q Select VFO mode with [VFO/MEMO].
w Select the memory channel to be transferred with
[Y]/[Z].
• Memory channel screen is convenient for selecting the
desired channel.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears if the selected memory channel is a
blank channel. In this case transferring is impossible.
e Push [VFO/MEMO] for 2 sec. to transfer the fre-
quency and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
• Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
• Displayed frequency and mode are transferred.
• Programmed frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q Select the memory channel to be transferred with
[Y]/[Z] in memory mode.
• And, set the frequency or operating mode if required.
w Push [VFO/MEMO] for 2 sec. to transfer the fre-
quency and operating mode.
• Displayed frequency and operating mode are trans-
ferred to the VFO.
e To return to VFO mode, push [VFO/MEMO] mo-
mentarily.
Frequency transferring can be performed in either VFO
mode or memory mode.
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
wq≥ewp≥pp
or
wq≥ewp≥pp
Beep
VFO/
Beep
MEMO
Beep
qr≥pqi≥pp
TRANSFERRING EXAMPLE IN MEMORY MODE
Operating frequency : 14.020 MHz/CW (M-ch 16)
Contents of M-ch 16 : 14.018 MHz/CW
qr≥pwp≥pp
Beep
VFO/
Beep
MEMO
Beep
qr≥pwp≥pp
VFO/
MEMO
qr≥pwp≥pp
Programmed contents appear.
6
MEMORY OPERATION
qw pp
qw pp
Push for 2 sec.
qw pp
qw pp
Push for 2 sec.
qw pp
qw pp
53