Installation And Connections; Opening The Transceiver's Case; Optional Bracket And Carrying Handle - Icom IC-718 Instruction Manual

9

INSTALLATION AND CONNECTIONS

Opening the transceiver's
case
Follow the case and cover opening procedures shown
here when you want to install an optional unit or adjust
an internal unit, etc.
CAUTION:
DISCONNECT the DC power cable
from the IC-718 before performing any work on the
transceiver. Otherwise, there is danger of electric
shock and/or equipment damage.
q Remove the 5 screws from the top of the trans-
ceiver and 4 screws from the sides, then lift up the
top cover.
w Remove the 5 screws from the bottom of the trans-
ceiver, then remove the bottom cover.

Optional bracket and carrying handle

D Mounting bracket
An optional IC-MB5
available to install the radio under a table, on a wall, in
a vehicle, etc.
Select an area to mount the receiver keeping in mind
that the weight of the transceiver is approx. 3.80kg.
D Carrying handle
An optional handle allows you to easily carry and
transport the transceiver.
Attach the MB-23
plied rubber feet as shown.
48
MOBILE MOUNTING BRACKET
with the sup-
CARRYING HANDLE
is