Power Supply Connections - Icom IC-718 Instruction Manual

3
INSTALLATION AND CONNECTIONS

Power supply connections

Use an optional PS-85
ating the IC-718 with AC power. Refer to the diagrams
below.
CONNECTING PS-85 DC POWER SUPPLY
CONNECTING NON-ICOM DC POWER SUPPLY
CONNECTING A VEHICLE BATTERY
Grommet
12
hen oper-
DC POWER SUPPLY w
13
9 10 11 12
5 6 7 8
1 2 3 4
DC power
socket
DC power cable
DC power
socket
13
9 10 11 12
5 6 7 8
1 2 3 4
Supplied
DC power cable
Fuses
NEVER connect
otherwise the fire hazard may occur.
CAUTION:
Before connecting the DC power
cable, check the following important items. Make
sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V
when you use a non-Icom power supply.
• DC power cable polarity is correct.
: positive + terminal
Red
: negative _ terminal
Black
PS-85
Connect to an AC outlet
using the supplied AC cable.
DC power supply AC outlet
13.8 V 20 A
_
+
AC cable
_
black
+
red
20 A fuses
NEVER connect
to
a 24 V battery.
+ red
_ black
12 V
battery
Supplied
DC power cable
to a battery without supplied DC fuses,
NOTE: Use terminals for
the cable connections.
Crimp
Solder