Fisher & Paykel FABRICSMART WA8560P Installation Manual/User Manual page 45

Wash problems
PROBLEM
Wash cycle time
longer than usual.
Small amount of
water in bowl at end
of cycle.
Creasing.
TROUBLESHOOTING
POSSIBLE CAUSES
If water pressure is low, cycle
time will increase due to longer
fill times.
The out of balance automatic
recovery setting may be selected
(ie Automatic Recovery is ON).
Wash cycle time is approximate
and may be affected by a
number of factors.
A small amount of water may
discharge from the fill nozzle
after wash.
Overloading of the washer.
Inappropriate cycle selection.
Spin speed too high.
Wash temperature too high
for items.
Other.
WHAT TO DO
Ensure that inlet hose filters are
not blocked.
Refer to 'Changing pre-set options'.
Refer to 'Wash cycles'.
This is normal.
Try reducing load size.
or
Choose EASY IRON
as these cycles have been designed to
minimise creasing.
Try selecting a lower spin speed.
Try selecting a lower wash temperature.
Sort your load so that items of similar
weight are washed together.
Sort your load so that items of similar
weight are washed together.
Do not leave wet clothes to sit in the
washer or laundry basket.
cycle
DELICATE
45