Fisher & Paykel FABRICSMART WA8560P Installation Manual/User Manual page 33

2
3
4
If you always use
COLD
wash be used regularly, eg every 5th wash should be at least a warm one to maintain the
cleanliness of your washer.
CHANGING PRE-SET OPTIONS
or
CONTROLLED COLD
Select wash temperature by
COLD
touching the
WASH TEMP
already selected).
The digital display shows the temperature
adjustment possible. The default setting is
, ie the temperature of the incoming
water from the supply for cold water.
Touch the
MORE
displayed. Your washer will now control the
cold temperature to approximately 20°C.
Note: each of the remaining settings equals
an approximate 1°C temperature increase or
decrease from this point.
Touch to save the setting (if you wish to
make no other changes).
water, we recommend that a
button (if not
button until is
or
WARM HOT
33