Control Panel - Fisher & Paykel FABRICSMART WA8560P Installation Manual/User Manual

1 2
1 POWER
2 Keylock
3 Wash cycles
4 Digital display
screen
5 Delay Start
6 Eco Active
7 Wash Temp
8 Soil Level
9 Spin Speed
!0 Water Level
!1 Options
!2 Lid Lock
!3 START/PAUSE
14

CONTROL PANEL

3
Press to turn the washer ON/OFF.
Touch for two seconds to disable all buttons on the display panel,
except button. This prevents accidental button presses.
POWER
Select your desired wash cycle by turning the SmartTouch™
Control Dial. The wash cycle icons will illuminate as you
turn the dial showing which cycle is selected (refer to the
'Wash cycles' section).
Shows the following:
'Time to go' – the remaining time in the cycle that is
z
currently running.
Delayed start time of wash cycle.
z
Notifications if an error is detected or a warning is necessary.
z
It allows you to delay the start of your wash by 5 mins up to
18 hours (refer to the 'Wash options' section)
Touch to turn Eco Active on or off.
Touch to increase or decrease water temperature.
Touch to select the level of soil in your load.
Touch to increase or decrease washer spin speed.
Touch to select the water level for your wash.
If Auto is selected your wash will automatically select the most
efficient water leave for the load.
Touch to select Eco Rinse, Soak or Stain Treatment.
Illuminates to indicate the lid of the washer is locked.
To open the washer pause the cycle.
Touch to start or pause the selected wash cycle.
4
5 6 7 8
!0 !1
9 !3
!2