Fisher & Paykel FABRICSMART WA8560P Installation Manual/User Manual page 32

2
3
Controlled Cold
If your incoming cold water temperature is very low you will get a less effective wash. The
CONTROLLED COLD
raise the temperature of the wash to approximately 20°C.
To programme the Controlled Cold temperature option:
1
32
CHANGING PRE-SET OPTIONS
option solves this problem by adding a small amount of hot water to
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Select the wash temperature you want to
adjust, eg , by touching the
WARM
button. The digital display
WASH TEMP
screen shows the current setting.
Touch the
MORE
to increase or decrease to the desired
temperature. Each increment is equal to
approximately 1°C.
Enter the Option Adjustment mode
(refer to the
OPTION ADJUSTMENT MODE
for instructions).
Select the cycle.
HEAVY
or button
LESS