8. Adjust the outer slide-rail brackets to fit the depth of the rack cabinet; then,
attach the front of the slide-rail brackets to the rack cabinet using four screws.
Make sure that the slide-rail brackets extend outside of the rack-cabinet
mounting flanges.
Note: Do not install screws in the slide-rail bracket middle holes. These holes
are for the thumbscrews on the front of the tray.
9. Loosely attach the back of the slide-rail brackets to the rack cabinet using four
screws. Make sure that the slide-rail brackets extend outside of the
rack-cabinet mounting flanges.
Note: Do not install screws in the slide-rail bracket middle holes. These holes
are for the optional console-switch mounting brackets.
Chapter 3. Hardware maintenance information
23