Linking Output Bins - Ricoh InfoPrint 1532 User Manual

Each bin accommodates
Output
bin name Print media
Output • 650 sheets
2
expander (75 g/m ) of plain
paper
• 50 envelopes
2
(75 g/m )
5-bin 120 sheets
2
mailbox (75 g/m ) of plain paper
for each of the five bins
for a total of 600 for all
bins
* See the instructions that came with the option for information on how to install options in relation to each other.

Linking output bins

Linking output bins lets you create a single output source so the printer can automatically switch output to the next available
bin. You can also set the output type for media such as card stock or envelope sizes that cannot be sent to an optional
output bin. For more information on the values available to configure your output bins, see the Menus and Messages
Guide.
Note: The bin sequence for linking always starts with the Standard Bin and proceeds from the bin nearest
to the floor to the bin farthest from the floor.
To link output bins:
1
Press on the operator panel.
2
Press until the
3
Press until the
4
Press until the
5
Press until the
The printer returns to Ready.
Printing
Printer Models
Model I
Model
II
Model
III
Model II
Model
III
appears next to Paper Menu, and then press
appears next to Bin Setup, and then press
appears next to Configure Bins, and then press
appears next to , and then press
Link
Identifying and linking output bins
How many
can be Bin is
installed on allowed to
the printer connect with
3 1 5-bin
mailbox, 1
high-capacity
output stacker,
or 1 finisher*
2 1 output
expander or 1
finisher*
.
.
.
59
Illustration of output bin