IMPORTANT SAFETY INSTRUCTIONS
Installation of this dishwasher requires
●
basic mechanical and electrical skills.
Be sure to leave these Instructions with
●
the Customer.
Installation must comply with your local
●
building and electricity regulations.
At the completion of the dishwasher
●
installation, the Installer must perform
the Final Checklist.
Remove all packaging materials
●
supplied with the dishwasher.
This dishwasher is manufactured for
●
indoor use only.
Ensure all water connections are
●
turned OFF. It is the responsibility of
the plumber and electrician to ensure
that each installation complies with all
Codes and Regulations.
The dishwasher MUST be installed
●
to allow for future removal from the
enclosure if service is required.
The switched power outlet must be
●
outside the dishwasher cavity, so that it
is accessible after installation.
Care should be taken when the
●
appliance is installed or removed to
reduce the likelihood of damage to the
power supply cord and hoses.
2
1
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
If the dishwasher is to be relocated
●
from one installation to another it must
be kept upright to avoid damage from
water spillage.
Make sure only new hoses are used
●
for connection (supplied with the
dishwasher). Old hoses should not be
reused.
Failure to install the dishwasher
●
correctly could invalidate any warranty
or liability claims.
If the product is installed in a motor
●
vehicle, boat or similar mobile facility,
you must bring the vehicle, boat or
mobile facility containing the product
to the service shop at your expense or
pay the service technician's travel to
the location of the product.