WARNING!
!
Electrical shock hazard
Before installing the dishwasher, remove the
house fuse or open the circuit breaker.
This appliance must be earthed. In the event
of a malfunction or breakdown, earthing will
reduce the risk of electric shock by providing
a path of least resistance for electric current.
This appliance is equipped with a cord having
an equipment-earthing conductor and an
earthing plug. The plug must be plugged into
an appropriate outlet that is installed and
earthed in accordance with all local codes and
ordinances.
WARNING- Improper connection of the
equipment-earthing conductor can result in a
risk of electric shock. Check with a qualified
electrician or service representative if you are
in doubt as to whether the appliance is properly
earthed.
Do not modify the power supply plug provided
with the appliance - if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician. Do not use an extension cord,
adapter plug or multiple outlet box.
Failure to follow this advice may result in
electrical shock or death.
WARNING!
!
Cut Hazard
Take care - panel edges are sharp.
Failure to use caution could result in injury or
cuts.
1
1
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
Installation of this dishwasher requires basic
●
mechanical and electrical skills.
Be sure to leave these Instructions with the Customer.
●
Installation must comply with your local building and
●
electricity regulations.
At the completion of the dishwasher installation, the
●
Installer must perform the Final Checklist.
Remove all packaging materials supplied with the
●
dishwasher.
This dishwasher is manufactured for indoor use only.
●
Ensure all water connections are turned OFF. It is the
●
responsibility of the plumber and electrician to ensure
that each installation complies with all Codes and
Regulations.
The dishwasher MUST be installed to allow for future
●
removal from the enclosure if service is required.
The switched power outlet must be outside the
●
dishwasher cavity, so that it is accessible after
installation.
Care should be taken when the appliance is installed
●
or removed to reduce the likelihood of damage to the
power supply cord and hoses.
If the dishwasher is to be relocated from one
●
installation to another it must be kept upright to avoid
damage from water spillage.
Make sure only new hoses are used for connection
●
(supplied with the dishwasher). Old hoses should not
be reused.
Failure to install the dishwasher correctly could
●
invalidate any warranty or liability claims.
If the product is installed in a motor vehicle, boat or
●
similar mobile facility, you must bring the vehicle, boat
or mobile facility containing the product to the service
shop at your expense or pay the service technician's
travel to the location of the product.