Removing And Replacing The Warming Drawer - Fisher & Paykel OR30SDG6 User Manual

Removing and replacing the warming drawer

IMPORTANT!
—
Always turn off the range at the wall first.
—
Ensure the oven and warming drawer have cooled down completely before starting.
—
Ensure the drawer is completely empty before removing it.
—
Always position your hand at the bottom of the drawer to open and close it.
To remove the warming drawer
1 Open the drawer completely.
2 Open the levers fully on both sides and hold in place:
— On the left side push the lever down
— On the right side push the lever up
3 Remove the drawer while holding the levers in position.
Fitting the warming drawer
1 Insert the drawer guides onto the sliding runners on either side of the range interior.
— Make sure they are correctly lined up on both sides of the drawer.
2 Gently close the drawer completely. The safety catches will automatically hook into
place.
CARE AND CLEANING
51