Table of Contents
Advertisement
●
Preference Settings
The monitor's settings can be configured to suit the usage environment or personal preference.
Function
USB CHARGE
Normal
Port
Charging Only
Power Save
On
Off
Power Indicator On
Off
28
Chapter 3 Advanced Adjustment / Setting
Setting
Value
The
USB downstream port of the monitor supports boost charging via
USB 3.0. By changing this setting to "Charging Only", the device connected
to the
port can be charged in a shorter period of time than that which
would be required when it is set to "Normal".
Note
• Before changing this setting, terminate communication between the
PC any USB devices connected to the monitor. All communication is
temporarily interrupted when the setting is changed.
• The device connected to the
• When this is set to "Charging Only", data communication cannot be
established between the device connected to the
and the device will not operate.
• When this is set to "Charging Only", charging is possible even when the
monitor is not connected to the PC using a USB cable.
The monitor can be set to enter power saving mode according to the state of
the PC.
The monitor changes to power saving mode about 15 seconds after signal
input ceases to be detected.
When the monitor has shifted to power saving mode, images are not
displayed on the screen.
• Exiting power saving mode
- If the monitor receives input, it automatically exits power saving mode
and returns to the normal display mode.
Note
• At the time of shifting to power saving mode, a message that indicates
the transition is displayed 5 seconds in advance.
• During PbyP/PinP display, the monitor only enters the power saving
mode when signals are not input from all PCs.
• When not using the monitor, you can turn off the main power supply or
disconnect the power plug so that the power is cut completely.
• When the monitor is in power saving mode, devices connected to the
USB downstream port will still work. Therefore, power consumption of
the monitor varies with connected devices even in power saving mode.
The power indicator (white) can be turned off in normal operation mode.
Description
port must support boost charging.
port and the PC,
Advertisement
Table of Contents
