Preference Settings - Eizo FlexScan EV2451-WT User Manual

●

Preference Settings

The monitor's settings can be configured to suit the usage environment or personal preference.
Function
Menu Rotation
Power Save
Power Indicator
Monitor Reset
24 Chapter 3 Advanced Adjustment/Setting
Setting Range
0° Change the orientation of the Setting menu when using the monitor
90° screen in the portrait display position.
270°
Note
• Make sure that the cables are correctly connected.
• PC settings must be configured to use the monitor in a portrait
position.
• The menu cannot be rotated by 180˚. To install the monitor rotated
by 180˚, perform monitor adjustment/settings before rotating the
monitor.
On The monitor can be set to enter power saving mode according to the
Off state of the PC.
The monitor changes to power saving mode about 15 seconds after
signal input ceases to be detected.
When the monitor has shifted to power saving mode, images are not
displayed on the screen.
• Exiting power saving mode
- If the monitor receives input, it automatically exits power saving
mode and returns to the normal display mode.
Note
• At the time of shifting to power saving mode, a message that
indicates the transition is displayed 5 seconds in advance.
• When not using the monitor, you can turn off the main power supply
or disconnect the power plug so that the power is cut completely.
• When the monitor is in power saving mode, devices connected to the
USB downstream port will still work. Therefore, power consumption
of the monitor varies with connected devices even in power saving
mode.
• Power consumption varies even when the stereo mini jack cable is
connected.
On The power indicator (white) can be turned off during screen display.
Off
- Restore all settings to their default values except for the following
settings.
• Settings on the "Administrator Settings" menu
Note
• For details on default settings, see
40).
Description
"Main Default Settings" (page