Preference Settings - Eizo FlexScan EV2780-BK User Manual

Function
Input Color Format
*2 Only enabled when input signal information according to which the setting can be automatically
determined is detected
*3 Only enabled during HDMI input
*4 Only enabled during DisplayPort input or USB-C input
Function
Input Range
●

Preference Settings

The monitor's settings can be configured to suit the usage environment or personal preference.
Function Setting Range
Menu Rotation 0°
90°
270°
Setting Range
*2
Auto
*3
YUV 4:2:2
*3
YUV 4:4:4
YUV *4
RGB
Setting Range
Auto
Full
Limited
Change the orientation of the Setting menu when using the monitor
screen in the portrait display position.
Note
• Make sure that the cables are correctly connected.
• PC settings must be configured to use the monitor in a portrait
position.
• The menu cannot be rotated by 180˚. To install the monitor rotated
by 180˚, perform monitor adjustment/settings before rotating the
monitor.
Description
The color format of the input signal can be specified.
Try changing this setting if colors are not displayed
correctly.
Note
• This setting is required when a DVI device is
connected to the monitor via the HDMI connector
port using a DVI-HDMI conversion connector.
Description
Depending on the PC, black and white of the video
level of the signal output to the monitor may be limited.
If a limited signal is displayed on the monitor, black
will appear faint and white will appear dull, leading to a
reduction in contrast. The output range of such signals
can be extended to match the actual contrast ratio of
the monitor.
• "Auto" Automatically identifies the brightness
range of the input signal and displays the image
accordingly.
• "Full" Extension of the signal output range is not
performed.
• "Limited" Extends the signal output range through
0 to 255 and displays the image.
Description
Chapter 3 Advanced Adjustment/Setting
23