Hot Plug - I-Tech BHK-115-8e User Manual

Hot Plug

The BHK-117-16e supports "Hot Plug" function for easy addition or removal of PCs. The user
can arrange or maintain PCs as follows:
c. A PC can be disconnected and reconnected to the same or different port of the KVM unit
without having to power it off as long as it is not the Daisy-chain port or pass through port.
d. The pass through port PC (i.e. The pass through port means the console port is connected
to PC directly) is powered on. Before you go hot plug function, please switch to this pass
through port to next port and then switch back to the pass through port.
e. You may unplug the mouse or the keyboard from the console port and plug it back in at any
time.
N :
OTICE
Some O.S. (Operation Systems) like SCO Unix are unable to support " Hot Plug "
function. If you apply "Hot Plug" to this kind of O.S., it will cause unpredictable
behavior or shut down the PC. Before attempting to use " Hot Plug " , please make
sure your O.S. and software driver supports the "Hot Plug" function.
www.i-techcompany.com
BHK Series Manual
36