5
Press one of the [8 ] (Save) buttons to call up the User Master Compressor display
for the Save operation.
6
Use the [2 ]–[5 ] buttons to select the destination for saving the settings as a
User Master Compressor type.
If necessary, change the Master Compressor name. Use the [6 ] (Rename) buttons to call up the
Character Entry window, enter the name, and then press the [8 ] (OK) button. The Master Compressor
setting saved here can be selected as described in step 2–3.
Block Diagram
8
74
DGX-670 Reference Manual