Cleaning And Care - Fisher & Paykel MO24SS3Y Installation Manual/User Manual

Table of Contents

Advertisement

CLEANING AND CARE

Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning.
Exterior
The outside surface is painted. Clean the outside with mild soap
and water; rinse and dry with a soft cloth. Do not use any type of
household or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to remove any
spills or spatters. Metal parts will be easier to maintain if wiped
Exterior
frequently with a damp cloth. Avoid the use of spray and other harsh
cleaners as they may stain, streak or dull the door surface.
Touch Control Panel
Care should be taken in cleaning the touch control panel. If the
control panel becomes soiled, open the oven door before cleaning.
Wipe the panel with a cloth dampened slightly with water only.
Dry with a soft cloth. Do not scrub or use any sort of chemical
cleaners. Close door and touch STOP/CLEAR pad.
Interior
Cleaning is easy because little heat is generated to the interior surfaces;
therefore, there is no baking and setting of spills or spattering.
To clean the interior surfaces, wipe with a soft cloth and warm water.
DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS.
For heavier soil, use baking soda or a mild soap; rinse thoroughly
with hot water. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO
ANY PART OF THE OVEN.
Interior
Waveguide Cover
The waveguide cover is made from mica so requires special care.
Keep the waveguide cover clean to assure good oven performance.
Carefully wipe with a damp cloth any food spatters from the surface
of the cover immediately after they occur. Built-up splashes may
overheat and cause smoke or possibly catch fi re. Do not remove the
waveguide cover.
Odor Removal
Occasionally, a cooking odor may remain in the oven. To remove,
combine 1 cup water, grated peel and juice of 1 lemon and several
whole cloves in a 2-cup glass measuring cup. Boil for several minutes
using 100% power. Allow to set in oven until cool. Wipe interior with
a soft cloth.
Turntable
Turntable/Turntable Support
The turntable and turntable support can be removed for easy
cleaning. Wash them in mild, sudsy water; for stubborn stains
use a mild cleanser and non abrasive scouring sponge.
They are also dishwasher-proof. Use upper rack of dishwasher.
Turntable Support
The turntable motor shaft is not sealed, so excess water or spills
should be wiped up immediately.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mo-24ss

Table of Contents