Managing The Cisco Sfs 3012R Server Switch - Cisco SFS 3012R Hardware Installation Manual

Managing the Cisco SFS 3012R Server Switch

Figure 2-7
Press here
To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port,
and then pull the latch away from the port with your other hand and gently wiggle the connector away
from the port, as shown in
Figure 2-8
Pull here

Managing the Cisco SFS 3012R Server Switch

You can manage the Cisco SFS 3012R Server Switch with the following methods:
•
•
•
Refer to the Cisco SFS 7000 Series Product Family Element Manager User Guide, Cisco SFS 7000
Series Product Family Chassis Manager User Guide, and the Cisco SFS 7000 Series Product Family
Command Reference for more information about managing the Cisco SFS 3012R Server Switch.
Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
2-12
Removing a Pinch Connector
Press here
Figure
Removing a Pull Connector
Hold here
Command Line Interface (CLI)—a text-based interface accessible through a direct serial
connection, Telnet over IP, or SSH over IP.
Element Manager (GUI)—A graphical interface installed on a workstation, accessible over IP.
Chassis Manager (GUI)—A graphical interface that you access with a web browser.
Chapter 2 Installing and Booting the Cisco SFS 3012R Server Switch
1 3
2-8.
Hold here
1 0
OL-11187-01