Chapter 4 Managing The Cisco Sfs 7000P Switch; Leds; Infiniband Port Leds - Cisco SFS 7000P Hardware Installation Manual

LEDs

InfiniBand Port LEDs

Figure 4-1 InfiniBand Port LEDs Location
Port LEDs
Cisco SFS 7000P Hardware Installation Guide
4-2
Table 4-1 Interpreting the Chassis Status LED
Color Indication
Off No system power or LED failure.
Yellow (solid) Operator intervention required. An system error was detected,
such as a fan error, a POST failure, or a power supply failure.
The ! label (available on the back of the chassis) indicates a
failure.
Yellow Initiated automatically during the LED test that follows the
(blinking) application of power (16 seconds).
Solid green Indicates proper operation and no critical errors.
The InfiniBand port LED is located next to each InfiniBand port. The InfiniBand
LED represents the logical link and the logical link activity. For InfiniBandport
LED locations, see Figure
For information on interpreting the InfiniBand Port LED, see
Table 4-2 InfiniBand Port LED
Color Indication
Off Logical link has not been established.
Solid green Logical link has been established.
Blinking green Logical link was established with activity.
Chapter 4
4-1.
Managing the Cisco SFS 7000P Switch
Table 4-2.
OL-9167-01 Rev. A0